| HOW
TO FIX |
 It’s
easier than you think, most customers will
be able to install their own blinds. If you have any
difficulty in installing your new window coverings,
contact our Customer Service Desk and we will do it
for you.
In order to properly install your blinds we will provide
detailed instruction manuals to describe the many
different mounting options that you may encounter.
Before you
start installing, collect the following tools that
are usually required:
-
Pencil or marker - to mark
the placement of the mounting screws
-
Electric Drill - to drill holes
for the mounting screws
-
Screwdrivers - Flat head screwdrivers
will be required
-
Tape measure - for accuracy
-
Ladder - tall enough for you
to easily reach the area to mount the top brackets
-
Screws - select the type of
mounting screw based on the mounting surface (ie.
wood, drywall, cement etc.)
Installation
Brackets
The installation bracket will be different for
each type of blind,And it will be provided along
with blinds as per the size.
Hold Down
Brackets
Hold down brackets are optional installation components
used to prevent the bottom of the blind from swaying.
Horizontal
Blinds
INSTALLATION :
The Brackets can be fixed on the window frame or
on the wall.And it can be placed leaving an allowance
of 10cms from either side of the blind, Upto 1.5Mtr
width(Blind) 2 brackets are required and intermediate
brackets shall be installed at maximum 1metre distance
depending on the width of the blind. The headrail
of the blind is then locked to the brackets and
the blind is installed.
Vertical
Blinds
INSTALLATION :
The Brackets can be fixed on the window frame or
on the wall.And it can be placed leaving an allowance
of 10cms from either side of the blind, Upto 1.5
Mtrs 2 brackets are required and intermediate brackets
shall be installed at maximum 1metre distance depending
on the width of the blind. The headrail of the blind
is then inserted into the bracket ,The vanes are
then snapped into the runners which are attached
to the headrail, the bottom weights are to be then
inserted into the vane pockets and the link chains
are to be clipped on to the bottom weight from right
to left on one side and left to right on the other
side or either wise.
|
|
